Bioprotective agent ТМ «TRIORA» (Копия) - IE ZIP LLC preloader
Показать категории
Показать фильтры товаров

Bioprotective agent ТМ «TRIORA» (Копия)

    • Coverage

      1 l per 5 m²

    • Thinner


    • Drying time

      4-12 hours at +18-22 °С and 65% RH

    • Drying time

      24 months

    • Containers

      1l, 5 l

    • Type of works

      Interior, Exterior


Value of the product

  • Ready-made water-based product;
  • Active substances of the product penetrate deeply into the surface, clearing it of fungi and mould;
  • For interior and exterior use.

Recommended uses
To remove fungi, mould, moss, algae from interior and exterior plastered, stone and concrete surfaces.
Suspension of pigments and fillers in water-based acrylic dispersion supplemented by various auxiliary materials.
Application guidelines
Surface preparation:
The surface infected with microorganisms must be cleaned by exterior action and washed out with water.
No dilution needed. Ready to use.
Application guidelines
Apply a thin uniform layer of the product with a brush on the prepared dry surface. Further treatment of the surface must be performed only after full drying of the bioprotective agent. Work at temperature +5°С-+35°С.
Safety precautions
Keep away from children. If you are splashed in the eyes, flood them immediately with fresh water.
Keep and transport in a tightly closed original container, at temperature +5°С-+35°С. Keep away from heat and direct sunlight. Protect from freezing! Closed containers with remaining product shall be disposed of at designated recycling collection points.

[vfb id='13']
[vfb id='10']