Glue for foam рolystyrene TM «ZEBRA» (Копия) - IE ZIP LLC preloader
Показать категории
Показать фильтры товаров
Клей для пенополистирола

Glue for foam рolystyrene TM «ZEBRA» (Копия)

    • Coverage

      От 120 мл/м²

    • Thinner


    • Drying time

      24 hours at +18-22 °С and 65% RH

    • Drying time

      18 months

    • Containers

      280 ml

    • Type of works


    • Colour scale



The value of the product

  • Requires no exposure to air before gluing;
  • No sharp smell.

Recommended Uses
For glueing decorative elements, ceiling and insulating boards made of compacted foam and extruded polystyrene, rigid foam plastic, synthetic fibre-based materials, radiator heat screens to be fixed to wooden, gypsum, mineral surfaces, MDF, WPB. For gluing foam polystyrene decorative elements if additional fasteners are used.
Suspension of pigments in highly elastic water-based dispersion supplemented with auxiliary materials.
Method of application
Surface preparation:
The surface to be bonded should be dry, free of dust and oil.
Application guidelines:
Use at temperature +5 °С and above. There are two ways to apply the glue: multi-point gluing or full-surface gluing. The open time (time during which the glued material can be moved, slipped) is up to 50 minutes depending on the temperature and absorbency of the surface. Glue For Foam Polystyrene does not require exposure to air before gluing. Remove excess of glue with a damp sponge. Wash the tools with water after use.
Safety Precautions
Keep away from children. If you are splashed in the eyes, flood them immediately with fresh water.  Avoid getting into sewage.
Keep and transport the glue in a tightly closed original container, at temperature +5°С-+35°С. Protect from freezing! Keep away from heat and direct sunlight. Closed containers with remaining product shall be disposed of at designated recycling collection points.

[vfb id='13']
[vfb id='10']